Toshiba Magnia 7010 - Manual (Page 110)

System Configuration Setup
CMOS Setup Utility 94
To start the Setup Utility, press F2 when prompted onscreen.
When you press F2, the message changes to “Entering Setup....” and the Setup
Utility starts after the end of the Power On Self Test (POST).
NOTE: If you do not press F2 , the operating system begins to load when
the POST finishes.
Phoenix BIOS 4.0 Release 6.0
Copyright 1985-1999 Phoenix Technologies Ltd., All Rights Reserved
S450NX0.86B. XXXX.XXX.XXXXXXXXXX
BIOS Release X.XX
N x Pentium ® Xeon ™ Processor XXX MHz
Wait for ECC Memory initialization…Done
0000640K System RAM Passed
0512k Cache SRAM Passed
System BIOS Shadowed
Video BIOS Shadowed
CMB upper limit segment address: XX
Press to enter: SETUP