Toshiba Magnia 7010 - Manual (Page 129)

System Configuration Setup
Built-in SCSI utility
113
™ SCAM Support
Do not change the settings
™ Parity
Sets the parity check by on-board SCSI controller to enabled (Check) or
disabled (Not check).
™ Host SCSI ID
Sets the SCSI ID of on-board SCSI controller.
™ Scan Order
Sets the SCSI devices scanning order. Do not change the settings.
™ Removable Media Support
Do not change the settings.
™ CHS Mapping
Do not change the settings.
™ Spinup Delay
Sets the spinup delay time for each HDD.
™ Secondary Cluster Server
Do not change the setting.
™ Sync Rate
Sets the maximum synchronized transfer rate of on-board SCSI controller.
™ Data Width
Sets the data transfer width (16-bit or 8-bit) of on-board SCSI controller.
™ Disc
Sets disconnect command enabled (on) or disabled (off).
Device Selections (Default settings for all devices listed)
Sync Rate 80
Data Width 16
Disc On
Time Out 10
Scan Bus Yes
Scan LUNS Yes
Queue Tags On