Toshiba Magnia 7010 - Manual (Page 91)

75
System
Configuration Setup
The server is set up before it leaves the factory. However, you need to
reconfigure the system if you change its setting by adding optional devices.
NOTE: The screens shown in this chapter are examples. Your screens may
look slightly different.
System Setup Utility (SSU)
The System Setup Utility (SSU) is a menu-type utility to manage the hardware
resources of system boards and expansion cards. Use the SSU to prevent
conflicts among the resources (DMA channels, interrupt levels, I/O port
addresses, memory addresses, etc. of the system boards and expansion cards).
Use the SSU in the following cases:
™ Change system board settings.
™ Install or remove expansion cards and change their settings.
™ Verify the settings.
Some of the ISA expansion cards have a configuration file (CFG file) as an
accessory for hardware setup.
The CFG file is necessary to setup the hardware using the SSU.
NOTE: If you make changes to the system configuration or settings using
the SSU, save the changes. The server only recognizes a saved
configuration.