Toshiba Magnia 7010 - Manual (Page 57)

Installing Hardware
Adding memory
41
Highlighted row represents standard system configuration.
Fill the memory slots using the following memory module combinations:
Installing a memory module
CAUTION: Memory modules can be seriously damaged by static electricity.
It is best to wear a wrist or heel ground cable to discharge static electricity
carried on your body. If such equipment is not available, touch a grounded
metal object to discharge static electricity before working on sensitive
electronic components.
When installing memory:
1 If the server is in use, shut it down, set the AC switch on the back of the
server to OFF and unplug the power cable.
CAUTION: Installing a memory module while the power is on could
damage the module and/or the server.
2 Remove the server covers. See “Removing and replacing the server panels”
on page 19.
512 512 256 1280
512 512 1024
512 256 768
512 512
Memory Combination
256MB Four 64MB EDO DIMMs
512MB Four 128MB EDO DIMMs
1024MB Four 256MB EDO DIMMs
Memory Configuration Table
Bank A Bank B Bank C Bank D Total memory(MB)