Toshiba Magnia 7010 - Manual (Page 115)

System Configuration Setup
CMOS Setup Utility
99
Advanced setup
™ Plug and Play O/S
Leave set to No.
™ Reset Configuration Data
Do not change the setting.
™ PCI Configuration
Set PCI devices from the following submenu, which displays when PCI
Configuration is selected.
PCI Device, Embedded SCSI A
Set the built-in SCSI controller from the following submenu, which
displays when this item is selected.
Option ROM Scan
Change the BIOS ROM on the built-in SCSI controller. Set it to Enabled .
Enable Master
Set the PCI BUS Master mode on the built-in SCSI controller. Set it to
Enabled.
Setup Warning
Setting items on this menu to incorrect values
may cause your system to malfunction.
Plug & Play O/S: [No]
Reset Configuration Data: [No]
PCI Configuration
I/O Device Configuration
Use Multiprocessor Specification: [1.4]
Large Disk Access Mode: [LBA]
System Wakeup Feature [Disabled]
Pause Before Boot [Disabled]
> Advanced Chipset Control
> PCI Device, Embedded SCSI A
> PCI Devices
Option ROM Scan: [Enabled]
Enable Master: [Enabled]
Latency Timer: [0080h]
Active Termination [SCSI A & B ON]
Single-Ended Force/Auto Set [Auto]