Toshiba Magnia 7010 - Manual (Page 55)

Installing Hardware
Adding memory
39
6 Plug in the power cable and switch on the server.
NOTE: If you are installing a DDS Auto Loader, you cannot install a second
fan module.
Adding memory
The server has 16 memory slots divided into four groups: A, B, C, and D,
divided into four slots each group.
You can install a Dual In-line Memory Module (DIMM) with Error Correction
Control (ECC) in each slot. Four module sizes are available: —, 64 MB,
128 MB, and 256 MB. See “Specifications” on page 133 for more information.
The system supports up to 4 GB of memory. The memory controller supports
EDO DRAM. Install memory beginning with Group A to Group D as indicated
below.