Toshiba Magnia 7010 - Manual (Page 117)

System Configuration Setup
CMOS Setup Utility
101
Floppy disk controller
Controls whether the built-in floppy disk controller is active (enabled) or
inactive (disabled). Set it to Enabled.
→ (Onboard Disk Controllers) Onboard Floppy Controller
PS/2 mouse
Sets the PS/2 mouse configuration. Do not change the settings.
™ Use multiprocessor specification
This concerns the multiprocessor specifications. Set it to 1.4.
™ Large disk access mode
Specifies how to access a large-capacity hard disk drive. Set it to LBA.
™ System Wakeup Feature
This setting is related to the Wake ON LAN function.
To use the Wake ON LAN function, set this setting to “Enabled”.
™ Pause Before Boot
Sets whether or not to pause the unit before booting the OS after execution
of the POST command is completed.
When this setting is set to “Enabled”, the unit stops for several seconds
before the OS is booted.
™ Advanced chipset control
Do not change this setting.
Security menu
All settings shown in the illustration are the recommended values.
BIOS setup utility menu
User Password Is: Clear
Administrator Password is: Clear
Set User Password [Enter]
Set Administrative Password [Enter]
Password on boot: [Disabled]
Fixed disk boot sector: [Normal]
Secure Mode Timer: [2 hr]
Secure Mode Hot Key: [ ]
Secure Mode boot: [Disabled]
Video Blanking: [Disabled]
Floppy Write Protect [Disabled]