beautypg.com

Xerox WorkCentre M24-6082 User Manual

Page 70

background image

6a4 - NetBIOS over IP Client/Server Printing

2.

After verifying that the TCP/IP Protocol is present, click on TCP/IP Protocol to highlight it, and click on
the Properties button of the Protocols window. If using Dynamic TCP/IP Addressing, select the radio
button for Obtaining an IP Address Automatically from the DHCP Server. If using Static TCP/IP
Addressing, select the radio button marked Specify an IP Address, and enter in the required IP
Address, Subnet Mask, and Gateway addresses for this workstation. Click OK when done.

3.

Select the Services tab and verify that the Workstation service is installed. This is the NT workstation's
client for communicating on Microsoft Networks using the SMB protocol.
Note: If the Workstation service is NOT loaded, click the Add button, select Workstation from the
available list, and click OK. If the setup program fails to find the required files, you will have to click
Have Disk… to load the service from the Operating System installer disk for this workstation.

4.

Click the DNS Tab and make sure that the workstation has a Host Name entered into the Host Name
text entry box. Optionally enter in the Domain in which this Host resides into the Domain text box
(xerox.com, for example). Optionally use the Add… button to enter in DNS Server IP Addresses for the
DNS Service Search Order.

5.

Click on the WINS Address Tab and verify that the "Enable DNS for Windows Resolution" checkbox is
checked (the preferred method for resolving host names to IP addresses on TCP/IP networks).
Note: If you are operating a Windows Internet Naming Service (WINS) Server on an NT only network,
you might alternatively wish to deselect the "Enable DNS for Windows Resolution" checkbox and supply
the IP addresses of a Primary (and Secondary, if used) WINS Server.

Add the Printer to the Windows NT4 Desktop

1.

From the Start menu, select Settings and then Printers.

2.

Double-click Add Printer.

3.

When the Add Printer Wizard displays, select Network Printer.

4.

Select Browse to search for the printer's Server over the Microsoft network.

5.

Select the plus symbol (+) to the left of Entire Network to expand it if necessary.

6.

When the Server is located, double click on the Server's name.

7.

Select the name of your Printer from the list of available network printers on the Server and click the OK
button.

8.

Click Next to open the Manufacturers and Printers window.

9.

When the Manufacturers and Printers window displays, select Have Disk and browse to the location of
your print drivers.

10.

Select the .INF file and click Open.

11.

When the "Install from Disk" screen displays, verify that the path and file name are correct and click OK.

12.

Select the model that corresponds to your Printer and click Next.

13.

At the next dialog, enter a name for your Printer and select either Yes or No for making this printer your
default Windows printer. Select Yes if you will be printing primarily to this printer from your Windows
applications. Click Next.

14.

Select Yes to print a Test Page.

15.

Select Finish and verify that the Test Page printed out at the Printer.

Configure the Print Driver

1.

From the Start menu, select Settings and then Printers.

2.

Right click on the Printer's icon and select Document Defaults.

3.

Select the correct paper size and any other default settings you wish to set for the printer.

file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a4.htm (3 of 5) [9/4/03 8:32:44 AM]