Xerox WorkCentre M24-6082 - Manual (Page 175)

Properties Tab
Table, click the rectangular Apply New Settings button, then click the Reboot button (always available
on the Status Tab) to remotely reboot the Printer.
Note: It is possible to have additional hot links displayed in this beginning hot links list in the Properties Tab
directory. For example, if "Mail Notice" is selected in the Table of Ports (through the Port Status hot link), and
the Printer is restarted, a hot link will be displayed in the list for configuring individual notification that the Printer
has just printed incoming e-mail. Note that the ability to print incoming e-mail is set from the E-mail hot link in
the Protocol Settings file folder of the directory tree.
The Three Folders of the Directory Tree
1. The first File Folder in the Properties Tab directory tree, labeled Port Settings, contains Ethernet and
Parallel Port hot links. Note that TokenRing requires the installation of a separate kit to be supported.
Click on the Ethernet hot link to view or change Ethernet speed settings from a drop-down selection
list. Selections include: Autosensing, 10 Base-T, and 100 Base-TX. To have the Printer register
changes made to any settings, click the rectangular Apply New Settings button.
Click on the Parallel hot link to view or change the enablement settings for Bi-Directional
Communications (a check box) and Parallel Port Timeout (Auto Eject Time), with a range of 5 to
1275 seconds. To have the Printer register changes made to any settings, click the rectangular Apply
New Settings button.
2. The second File Folder in the Properties Tab directory tree, labeled Protocol Settings, contains a list of
hot links for viewing or modifying the settings for the Protocols supported by the Printer. To have the
Printer register changes made to any settings, click the rectangular Apply New Settings button.
3. The third File folder in the Properties Tab directory tree, labeled Emulation Settings, contains a hot link
labeled Print Mode, and several Page Description Language links.
Click on the Print Mode hot link to set the Page Description Language emulation used by the Printer's
Input Ports displayed on the screen. Depending upon the Ports enabled at the Printer, the list of Ports
will include: Parallel, AppleTalk (with PostScript), SMB, NetWare, LPD, IPP and Port 9100. Typical
Page Description selections for each Port include: Autoselect, PostScript, HP-GL/2, PCL, and TIFF. To
have the Printer register changes made to any settings, click the rectangular Apply New Settings button.
Click on a Page Description Language hot link and the Edit button to access the Printer's default
preferences for processing that Page Description Language. To have the Printer register changes made
to any settings, click the rectangular Apply New Settings button.
The Last Hot Link in the Directory Tree
The last hot link in the Properties Tab directory, labeled Memory Settings, enables the viewing or changing of
the amount of memory allocated on the hard drive for spooling incoming jobs into buffers dedicated to specific
protocols. To have the Printer register changes made to any settings, click the rectangular Apply New Settings
button.
Note: When making setting changes, you may be prompted for the Administrator password.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/N1_3_PropertiesTab.htm (2 of 2) [9/4/03 8:33:14 AM]