Festo Контроллеры двигателя SFC-LAC - Manual (Page 76)

3. Installation
3−24
Festo GDCP−SFC−LACI−CO−EN en 0812NH
M12 adapter FBA−2−M12−5POL (IP54)
The bus is connected via a 5−pin M12 socket with PG 9 screw
connector. Use the second socket for the continuation of the
fieldbus.
Note
· Use protective caps or blanking plugs to seal unused
connections.
M12 adapter Pin no.
5
2
3
4
1
5
1
4
3
2 1 Screened
2 24 VDC bus
3 0 VDC bus
4 CAN_H
5 CAN_L
Protective cap or plug with bus
termination resistor if
connection is not used.
Bus in
Bus out
Tab. 3/9: Pin assignment of fieldbus interface (adapter for 5−pin M12 connection)
With the two M12 connections you can implement a T−
adapter.