Festo Контроллеры двигателя SFC-LAC User Manual
Page 204
6. Diagnostics and error display
6−4
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Overview organised according to the type of access to the
diagnostic information:
Access
Brief description
Advantages/
features
Detailed
description
LEDs
The LEDs indicate the readiness to
operate, positioning status, errors and
bus status.
Fast
on−the−spot"
recognition of
errors
Section 6.2
Control panel of
an
SFC−LACI−...−H2
On the LCD display:
Messages, warnings and faults
Fast
on−the−spot"
diagnosis
Section 6.3
In the [Diagnostic] menu:
Diagnostic data, operating mode,
current position set, target and actual
positions, speed as well as information
on communication via the fieldbus
Detailed
on−the−spot"
diagnosis
Section 4.3
Festo ConfiguraĆ
tion Tool
With active device connection:
Ĉ Display of the current position set,
target and actual positions as well
as speed.
Ĉ Display of the operating mode,
special outputs and operating states
as well as error messages of the
SFC−LAC.
Ĉ Display of the bus status
Ĉ Display of the diagnostic memory
Detailed diag−
nosis during
commissioning
Help for plug−in
SFC−LAC
Fieldbus
Ĉ Emergency messages
Ĉ Node guarding
Ĉ FHPP status bytes SCON and SPOS
Ĉ DS402 status word
Simple diagnosis
via the fieldbus
Section 6.5
Ĉ Extended access to diagnostic data,
e.g.Ădiagnostic memory (via FPC)
Ĉ Scanning the device status and comĆ
munication status via SDO
Detailed diagnoĆ
sis via the fieldĆ
bus
Tab. 6/2: Diagnostic information as per access