Festo Контроллеры двигателя SFC-LAC - Manual (Page 132)

5. Commissioning
5−30
Festo GDCP−SFC−LACI−CO−EN en 0812NH
5.4.2 Configuration of the CANopen master (I/O configuration")
Configuration with
EDS file EDS files are available for configuring the CANopen master.
These files are installed with the aid of the configuration
software of the CANopen master. For the procedure: see the
manuals for the software.
Obtainable from:
The accompanying CD in the CANopen" folder or the Festo
Internet site in the Download Area": www.festo.com
For the SFC−LACI, you will require one of the following EDS
files (in English):
Ĉ For data profile FHPP:
SFC−LACI−H0−CO−FHPP.eds
SFC−LACI−H2−CO−FHPP.eds
Ĉ For data profile DS 402:
SFC−LACI−H0−CO−DS402.eds
SFC−LACI−H2−CO−DS402.eds
Manual configuration Manufacturer ID:
Ĉ 1Dh
Profile ID depending on the profile:
Ĉ FHPP: 12Dh
Ĉ DS 402: 420192h