Festo Контроллеры двигателя SFC-LAC - Manual (Page 59)

3. Installation
3−7
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Connection Pin Designation Function Cable colour 1)
O1 Load voltage + 48 VDC load Black, 1
O2 Load voltage GND load Black, 2
1 Logic voltage +24 VDC logic White
2 Logic voltage GND logic Brown
3 Hardware
enable +24 VDC hardĆ
ware enable Green
4 FE FE 3) ć 2)
5 Hardware
enable GND hardware
enable Yellow
ć Plug housing FE 3) Earthing strap
with cable lug
M4
Earth
terminal
(housing) FE 3) ć
1) Cable colours with power supply cable type KPWR−MC−1−SUB−15HC−...
2) With cable type KPWR−MC−1−SUB−15HC−... not connected.Ă
3) Use only one connection; see section 3.3
Tab. 3/3: Power" connection (voltage supply) on the SFC−LACI
Caution
Damage to the device
The power supply inputs on the SFC−LACI have no special
protection against overvoltage.
· Make sure the permissible voltage tolerance is never
exceeded; see Tab. 3/4.