Festo Контроллеры двигателя SFC-LAC - Manual (Page 312)

B. Parametrising as per FHPP−FPC
B−84
Festo GDCP−SFC−LACI−CO−EN en 0812NH
Electronic type plate
Motor type
PNU 1030 ć uint16 r
Description Classification of the motor. Fixed: 0x0000.
CI / DS402 6402h 00h uint16 r
Maximum current
PNU 1034 ć uint16 rw
Description Maximum motor current in per mill of rated current (PNU 1035).
Note: The current limitation also limits the max. possible speed (or force).
Higher setpoint speeds may not therefore be reached, or the drive stops.
During homing: At greatly reduced values combined with high travelling
resistance, there is a danger that the drive will come to a standstill and the
SFC−LACI will wrongly recognize a stop.
CI / DS402 6073h 00h uint16 rw
Rated motor current
PNU 1035 ć uint32 rw
Description Nominal current of the motor in [mA]. The value is fixed.
CI / DS402 6075h 00h uint32 rw
Rated motor torque/force
PNU 1036 ć uint32 rw
Description Nominal force of the linear motor in [mN]. The value is fixed.
CI / DS402 6076h 00h uint32 rw