6 controller interface, Controller interface, N 3.6 – Festo Контроллеры двигателя SFC-LAC User Manual

Page 68

3. Installation

3−16

Festo GDCP−SFC−LACI−CO−EN en 0812NH

3.6

Controller interface

Communication with the higher−order controller (PLC/IPC)
occurs via the controller interface.

There is a 9−pin Sub−D plug on the SFC−LACI for connecting
the fieldbus. This connection is used for the incoming and
continuing fieldbus cables.

Note
Only fieldbus plugs of type FBS−SUB−9−BU−2x5−POL−B and
FBA−2−M12−5−POL from Festo ensure conformance to IP 54.

Note the instructions in section 3.7.5 if other sub−D plugs
are used.