Festo Электроцилиндр - Manual (Page 47)

5 Commissioning
Festo – GDCP-CMMO-ST-EA-SY-EN – 1301a – English 47
1. Switch to the parameterisation page by clicking at the far right.
2. Enter the type code of your EPCO drive in the uppermost text box in accordance with the rating
plate, and click
access required). Caution: Incomplete entry of the code may result in malfunctions, uncontrolled
behaviour and damage.
If you do not have a second network connection (e.g. WLAN/WiFi), you can continue to step 4 and
use the parameter file on the CD.
Fig. 5.3 Website: parameters
3. Click in the Windows dialogue window “Download file” to save the file to your computer.
4. Click and select the downloaded parameter file in the dialogue window.
Fig. 5.4 Selecting a parameter file
5. Click the box next to “Device Control” to assume higher-order control.
Fig. 5.5 Assuming higher-order control
6. Click on .
Fig. 5.6 Transferring a parameter file to the CMMO-ST