Festo Электроцилиндр - Manual (Page 32)

4 Electrical installation
32 Festo – GDCP-CMMO-ST-EA-SY-EN – 1301a – English
1
2
3
4 5 6 7
1 Power supply (X9)
2 Higher-order controller (PLC/IPC) (X1)
3 Ethernet (X18)
4 Reference switch (X1A)
5 STO (X3)
6 Encoder (X2)
7 Motor (X6)
Fig. 4.1 Connections on the CMMO-ST
Port Cable and Festo type code 1)
1 Power (X9) To be prepared by the customer
2 PLC/IPC (X1) Connecting cable: NEBC-S1G25-K-…-N-S1G25
Control cable: NEBC-S1G25-K-3.2-N-LE25
Connection block: NEBC-S1G25-C2W25-S7
Plug: NEBC-S1G25-C2W25-S6
3 Ethernet (X18) Standard network cable, RJ45 plug connector; category 5 or higher
4 Reference switch (X1A) See Festo catalogue
5 STO (X3)
To be prepared by the customer
6 Encoder (X2) Encoder cable
– NEBM-M12G8/W8-E-…-LE (G = straight; W = angled)
7 Motor (X6) Motor cable
– NEBM-S1W15-E-…-Q7: for motors with 15-pin plug
– NEBM-S1W9-E-…-Q5: for motors with 9-pin plug
– NEBM-M12G8-E-…-Q5: for size 28 motors
1) Specifications status August 2012. Only the current specifications in the Festo catalogue are relevant: www.festo.com
Tab. 4.1 Overview of cables (accessories)