Festo Электроцилиндр - Manual (Page 30)

3 Mounting
30 Festo – GDCP-CMMO-ST-EA-SY-EN – 1301a – English
3.3.2 H-rail mounting
1. Mount an H-rail (mounting rail in accordance with IEC/EN 60715: TH 35– 7.5 or TH 35– 15).
2. If not already mounted: Screw the H-rail clip 1 to the side of the controller ( Fig. 3.3).
Note
When using another screw: Please observe the maximum permitted screw-in depth of
5 mm.
3. Hang the CMMO on the H-rail as follows:
• by inserting the top into the hooks in the clip first, then
• press the H-rail downwards until the CMMO clicks into place.
max. 5 mm
1
2
1 H-rail clip 2 Maximum screw-in depth
Fig. 3.3 H-rail mounting