Sntp unicast client poll – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 80

Page 79
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Syntax
sntp unicast client enable
no sntp unicast client enable
Parameters
This command has no arguments or keywords.
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP servers.
Example
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept
SNTP traffic from servers.
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables polling for the Simple Network Time
Protocol (SNTP) predefined Unicast servers. Use the no form of this command to disable the polling for SNTP
client.
Syntax
sntp unicast client poll
no sntp unicast client poll
Parameters
This command has no arguments or keywords.
Default Configuration
Polling is disabled.
Command Mode
Global Configuration mode
User Guidelines
The sntp client poll timer Global Configuration mode command determines polling time.
Console(config)# sntp unicast client enable