Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 189)

LLDP Commands
Page 188
Example
The following example displays information about neighboring devices discovered using Link Layer Discovery
Protocol (LLDP).
console# show lldp neighbors
Port Device ID Port ID System Name Capabilities
--------- ---------------- -------- ---------- -------------
1/e1 0060.704C.73FE 1 ts-7800-2 B
1/e2 0060.704C.73FD 1 ts-7800-2 B
1/e4 0060.704C.73FC 9 ts-7900-1 B, R
1/e5 0060.704C.73FB 1 ts-7900-2 W
console# show lldp neighbors ethernet 1/1
Device ID: 0060.704C.73FE
Port ID: 1
System Name: ts-7800-2
Capabilities: B
System description:
Port description:
Management address: 172.16.1.1
802.3 MAC/PHY Configuration/Status
Auto-negotiation support: Supported.
Auto-negotiation status: Enabled.
Auto-negotiation Advertised Capabilities: 100BASE-TX full duplex, 1000BASE-T full duplex.
Operational MAU type: 1000BaseTFD
LLDP-MED capabilities: Network Policy.
LLDP-MED Device type: Endpoint class 2.
LLDP-MED Network policy
Application type: Voice
Flags: Unknown policy
VLAN ID: 0
Layer 2 priority: 0