beautypg.com

Show interfaces access-lists – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual

Page 39

background image

ACL Commands

Page 38

Example

The following example displays access lists.

show interfaces access-lists

The show interfaces access-lists Privileged EXEC mode command displays access lists applied on interfaces.

Syntax

show interfaces access-lists [ ethernet interface | vlan vlan-id | port-channel port-channel-number ]

Parameters

vlan-id— Specifies the ID of the VLAN.

interface — The full syntax is: unit/port.

port-channel-number — Valid port-channel Index.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays ACLs applied to the interfaces of a device:

console# show access-lists

IP access list ACL1

permit ip host 172.30.40.1 any

permit rsvp host 172.30.8.8 any

console# show interfaces access-lists

Interface

Input ACL

---------

---------

1/e1

ACL1

2/e1

ACL3