Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 354)

Page 353
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Example
The following example sets a mac-based classification rule.
map mac macs-group
The map mac macs-group VLAN Configuration mode command maps a MAC address or a range of MAC
addresses to a group of MAC addresses. Use the no form of this command to delete a map.
Syntax
map mac mac-address {prefix-mask | host} macs-group group
no map mac mac-address {prefix-mask | host}
• mac-address — Specifies the MAC address to be entered to the group.
• prefix-mask — Specifies the Mask bits. The format is the MAC address format.
• host — Specifies all 1’s mask.
• group — Specifies the group number. (Range: 1-2147483647)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example maps a MAC address or a range of MAC addresses to a group of MAC addresses.
show vlan macs-group
The show vlan macs-group privileged EXEC command displays MAC group information.
Syntax
show vlan macs-group
console(config)# vlan database
console(config-vlan)# map mac 00:08:78:32:98:78 9 macs-group 1
interface ethernet e17
console(config-vlan)# exit
console(config)# interface ethernet 1/e17
console(config-if)# switchport mode general
console(config-if)# switchport general map macs-group 1 vlan 2
console(config)# vlan database
console(config-vlan)# map mac 00:08:78:32:98:78 9 macs-group 1
interface ethernet e17