Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 117)

Ethernet Configuration Commands
Page 116
Syntax
port storm-control broadcast enable
no port storm-control broadcast enable
Parameters
This command has no arguments or keywords.
Default Configuration
Broadcast storm control is disabled.
Command Modes
Interface Configuration (Ethernet) mode
User Guidelines
Use the port storm-control broadcast rate Interface Configuration (Ethernet) mode command, to set the
maximum allowable Broadcast rate.
Use the port storm-control include-multicast Interface Configuration (Ethernet) mode command to enable
counting Multicast packets.
Examples
The following example enables Broadcast storm control on Ethernet port 1/e5.
port storm-control broadcast rate
The port storm-control broadcast rate Interface Configuration (Ethernet) mode command configures the
maximum Broadcast rate. Use the no form of this command to return to the default configuration.
Syntax
port storm-control broadcast rate rate
no port storm-control broadcast rate
Parameters
•
rate — Maximum kilobits per second of Broadcast and Multicast traffic on a port. (Range: 70 - 100000)
Default Configuration
The default storm control Broadcast rate is 3500 Kbits/Sec.
Command Mode
Interface Configuration (Ethernet) mode
console(config)# interface ethernet 1/e5
console(config-if)# port storm-control broadcast enable