Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 110)

Page 109
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
show interfaces configuration
The show interfaces configuration Privileged EXEC mode command displays the configuration for all
configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
---- ----------- ------- ------------------------------
e1 100M-Copper Enabled --
e2 100M-Copper Enabled --
e3 100M-Copper Enabled --
e4 100M-Copper Enabled --
e5 100M-Copper Enabled 100f, 100h, 10f, 10h
e6 100M-Copper Enabled --
e7 100M-Copper Enabled --
e8 100M-Copper Enabled --
e9 100M-Copper Enabled --
e10 100M-Copper Enabled --
e11 100M-Copper Enabled --
e12 100M-Copper Enabled --
e13 100M-Copper Enabled --
e14 100M-Copper Enabled --
e15 100M-Copper Enabled --
e16 100M-Copper Enabled --
e17 100M-Copper Enabled --
e18 100M-Copper Enabled --
e19 100M-Copper Enabled --
e20 100M-Copper Enabled --