Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 364)

Page 363
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Syntax
ip https server
no ip https server
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the crypto certificate generate Global Configuration mode command to generate an HTTPS certificate.
Example
The following example enables configuring the device from a secured browser.
ip https port
The ip https port Global Configuration mode command specifies the TCP port used by the server to configure the
device through the Web browser. Use the no form of this command to return to the default configuration.
Syntax
ip https port port-number
no ip https port
Parameters
•
port-number — Port number to be used by the HTTP server. (Range: 1 - 65535)
Default Configuration
The default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
console(config)# ip https server