Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 206)

Page 205
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Parameters
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on all port-channels.
console# show interfaces port-channel
Channel Ports
------- ---------------------------------
1 Active: 1/e1, 2/e2
2 Active: 2/e2, 2/e7 Inactive: 3/e1
3 Active: 3/e3, 3/e8