Show accounting – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 51

AAA Commands
Page 50
no enable password [level level]
Parameters
•
password — Password for this level. (Range: 1-159 characters)
•
level — Level for which the password applies. If not specified the level is 15. (Range: 1-15)
•
encrypted — Encrypted password entered, copied from another device configuration. (Range: 32 characters
in hexadecimal)
Default Configuration
No enable password is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a local level 15 password called ‘secret’ to control access to user and privilege levels. .
show accounting
The show accounting Exec mode command displays information about the accounting.
Syntax
show accounting
Parameters
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
Exec mode
User Guidelines
There are no user guidelines for this command.
Console(config)# enable password secret level 15