Ip domain-name – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 142

Page 141
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
no ip domain-lookup
Parameters
This command has no arguments or keywords.
Default Configuration
The default configuration is set to enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables IP Domain Naming System (DNS)-based host name-to-address translation.
ip domain-name
The ip domain-name Global Configuration mode command defines a default domain name used by the software
to complete unqualified host names (names without a dotted-decimal domain name). Use the no form of this
command to remove the default domain name.
Syntax
ip domain-name name
no ip domain-name
Parameters
•
name — Specifies the default domain name used to complete unqualified host names. Do not include the
initial period that separates an unqualified name from the domain name. (Range: 1-158 characters)
Default Configuration
A default domain name is not defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
console(config)# ip domain-lookup