Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 376)

Page 375
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Parameters
•
seconds — Number of seconds between re-authentication attempts. (Range: 300 - 4294967295)
Default Configuration
Re-authentication period is 3600 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the number of seconds between re-authentication attempts, to 300.
dot1x re-authenticate
The dot1x re-authenticate Privileged EXEC mode command manually initiates a re-authentication of all 802.1X-
enabled ports or the specified 802.1X-enabled port.
Syntax
dot1x re-authenticate [ethernet interface]
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example manually initiates a re-authentication of 802.1X-enabled Ethernet port 1/e16.
console(config)# interface ethernet 1/e16
console(config-if)# dot1x timeout re-authperiod 300
console# dot1x re-authenticate ethernet 1/e16