beautypg.com

Show bridge multicast address-table static, Show bridge multicast filtering – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual

Page 67

background image

Address Table Commands

Page 66

Note

A Multicast MAC address maps to multiple IP addresses as shown above.

show bridge multicast address-table static

The show bridge multicast address-table static Privileged EXEC mode command displays statically configured
Multicast addresses.

Syntax

show bridge multicast address-table static [vlan vlan-id] [address mac-multicast-address |

Parameters

vlan-id — A valid VLAN ID value.

mac-multicast-address — A valid MAC Multicast address.

ip-multicast-address — A valid IP Multicast address.

ip-address — Source IP address

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

A MAC address can be displayed in IP format only if it's in the range 0100.5e00.0000 through 0100.5e7f.ffff.

Example

The following example displays Multicast MAC address and IP Address Table information.

show bridge multicast filtering

The show bridge multicast filtering User EXEC mode command displays Multicast filtering configuration.

console# show bridge multicast address-table static

Multicast address table for VLANs in MAC-GROUP bridging mode:

Vlan

MAC Address

Type

Ports

----

--------------

-------

----------

1

0100.5e23.8787

static

1/e1, 2/e2

Forbidden ports for multicast addresses:

Vlan

MAC Address

Ports

----------

----------------

-------------------------------------

console#