Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 298)

Page 297
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SSH public RSA keys on the device.
show crypto key pubkey-chain ssh
The show crypto key pubkey-chain ssh Privileged EXEC mode command displays SSH public keys stored on
the device.
Syntax
show crypto key pubkey-chain ssh [username username] [fingerprint {bubble-babble | hex}]
Parameters
•
username — Specifies the remote SSH client username.
• bubble-babble — Fingerprint in Bubble Babble format.
• hex — Fingerprint in Hex format.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
console# show crypto key mypubkey rsa
RSA key data:
005C300D 06092A86 4886F70D 01010105 00034B00 30480241 00C5E23B 55D6AB22
04AEF1BA A54028A6 9ACC01C5 129D99E4 64CAB820 847EDAD9 DF0B4E4C 73A05DD2
BD62A8A9 FA603DD2 E2A8A6F8 98F76E28 D58AD221 B583D7A4 71020301 87685768
Fingerprint(Hex): 77:C7:19:85:98:19:27:96:C9:CC:83:C5:78:89:F8:86
Fingerprint(Bubble Babble): yteriuwt jgkljhglk yewiury hdskjfryt gfhkjglk