Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 312)

Page 311
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Example
The following example specifies a TACACS+ host.
tacacs-server key
The tacacs-server key Global Configuration mode command sets the authentication encryption key used for all
TACACS+ communications between the device and the TACACS+ daemon. Use the no form of this command to
disable the key.
Syntax
tacacs-server key key-string
no tacacs-server key
Parameters
•
key-string — Specifies the authentication and encryption key for all TACACS+ communications between the
device and the TACACS+ server. This key must match the encryption used on the TACACS+ daemon.
(Range: 0-128 characters)
Default Configuration
Empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication encryption key.
tacacs-server timeout
The tacacs-server timeout Global Configuration mode command sets the interval during which the device waits
for a TACACS+ server to reply. Use the no form of this command to return to the default configuration.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
Parameters
•
timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
console(config)# tacacs-server host 172.16.1.1
console(config)# tacacs-server key ati-s