Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 69)

Address Table Commands
Page 68
show bridge multicast unregistered
Use The show bridge multicast unregistered User EXEC mode command displays the unregistered multicast
filtering configuration.
Syntax
show bridge multicast unregistered [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Specify the required Ethernet port to display.
• port-channel-number — Specify the required Port-channel number to display.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the Multicast configuration for VLAN 1.
show ports security
The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
console# show bridge multicast unregistered
Port Unregistered
---- ------------
1/e10 Forward
1/e11 Filter
1/e12 Filter