Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 260)

Page 259
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
The following table describes significant fields shown above.
show snmp filters
The show snmp filters Privileged EXEC mode command displays the configuration of filters.
Syntax
show snmp filters [filtername]
Parameters
•
filtername — Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
user-group V3 priv Default "" ""
managers-group V3 priv Default Default ""
managers-group V3 priv Default "" ""
Field Description
Name Name of the group.
Security Model SNMP model in use (v1, v2 or v3).
Security Level Authentication of a packet with encryption. Applicable only to the SNMP v3
security model.
Views Read Name of the view that enables only viewing the contents of the agent. If
unspecified, all objects except the community-table and SNMPv3 user and
access tables are available.
Write Name of the view that enables entering data and managing the contents of
the agent.
Notify Name of the view that enables specifying an inform or a trap.