Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 109)

Ethernet Configuration Commands
Page 108
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active, but were shutdown by the system
for some reason (e.g., port security).
Example
The following example reactivates interface 1/e5.
show interfaces advertise
The show interfaces advertise Privileged EXEC mode command displays autonegotiation data.
Syntax
show interfaces advertise [ethernet interface | port-channel port-channel-number ]
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following examples display autonegotiation information.
console# set interface active ethernet 1/e5
console# show interfaces advertise
Port Type Neg Operational Link Advertisement