Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 73)

Clock Commands
Page 72
Default Configuration
No external clock source
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an external time source for the system clock.
clock timezone
The clock timezone Global Configuration mode command sets the time zone for display purposes. Use the no
form of this command to set the time to the Coordinated Universal Time (UTC).
Syntax
clock timezone hours-offset [minutes minutes-offset] [zone acronym]
no clock timezone
Parameters
•
hours-offset — Hours difference from UTC. (Range: -12 – + 13)
• minutes-offset — Minutes difference from UTC. (Range: 1 – 59)
• acronym — The acronym of the time zone. (Range: Up to 4 characters)
Default Configuration
Clock set to UTC.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display purposes and when the time is
manually set.
Example
The following example sets the timezone to 6 hours difference from UTC.
Console(config)# clock source sntp
Console(config) # clock timezone -6 zone CST