Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 40)

Page 39
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Chapter 3. AAA Commands
aaa authentication login
The aaa authentication login Global Configuration mode command defines login authentication. Use the no
form of this command to return to the default configuration.
Syntax
aaa authentication login {default | list-name} method1 [method2...]
no aaa authentication login {default | list-name}
Parameters
•
default — Uses the listed authentication methods that follow this argument as the default list of methods
when a user logs in.
• list-name — Character string used to name the list of authentication methods activated when a user logs in.
(Range: 1-12 characters).
• method1 [method2...] — Specify at least one from the following table:
Default Configuration
The local user database is checked. This has the same effect as the command aaa authentication login list-
name local.
Note
On the console, login succeeds without any authentication check if the authentication method is not
defined.
Command Mode
Global Configuration mode
K e y w o r d D e s c r i p t i o n
enable Uses the enable password for authentication.
line Uses the line password for authentication.
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.