Clear bridge, Port security, Clear bridge port security – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 59

Address Table Commands
Page 58
clear bridge
The clear bridge Privileged EXEC mode command removes any learned entries from the forwarding database.
Syntax
clear bridge
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example clears the bridge tables.
port security
The port security Interface Configuration mode command enables port security on an interface. Use the no form
of this command to disable port security on an interface.
Syntax
port security [forward | discard | discard-shutdown] [trap seconds]
no port security
Parameters
•
forward — Forwards frames with unlearned source addresses, but does not learn the address.
•
discard — Discards frames with unlearned source addresses. This is the default if no option is indicated.
•
discard-shutdown — Discards frames with unlearned source addresses. The port is also shut down.
•
trap seconds — Send SNMP traps, and specifies the minimum time between consecutive traps.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
console# clear bridge