Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 182)

Page 181
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Command Mode
Global Configuration mode.
User Guidelines
•
Use the lldp med network-policy Interface Configuration command to attach a network policy to a port.
• Up to 32 network policies can be defined.
Example
The following example defines LLDP MED network policy.
lldp med network-policy (interface)
The lldp med network-policy Interface Configuration (Ethernet) mode command attaches an LLDP MED
network policy to a port. Use the no form of this command to remove LLDP MED network policy from a port.
Syntax
lldp med network-policy {add|remove} number
no lldp med network-policy
Parameters
•
number — Network policy sequential number.
Default Configuration
No network policy is attached.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
•
For each port, only one network policy per application ( voice, voice-signaling, guest-voice,
guest-voice-signaling, softphone-voice, video-conferencing, streaming-video and video-signaling)
can be defined.
Example
The following example attaches an LLDP MED network policy to a port.
lldp med location
The lldp med location Interface Configuration mode command configures location information for the LLDP MED
for an interface. Use the no form of this command to delete location information for an interface.
console(config)# lldp med network-policy 1 voice vlan 2 vlan-type untagged
console(config)# interface ethernet e5
console(config)# lldp med network-policy add 1