Show snmp – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 256

Page 255
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Parameters
•
variable-name — MIB variable name.
•
name value — List of name and value pairs. In the case of scalar MIBs, only a single pair of name values. In
the case of an entry in a table, at least one pair of name and value followed by one or more fields.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Although the CLI can set any required configuration, there might be a situation where a SNMP user sets a MIB
variable that does not have an equivalent command. In order to generate configuration files that support those
situations, the snmp-server set command is used.
This command is case-sensitive.
Example
The following example configures the scalar MIB sysName with the value ati.
show snmp
The show snmp Privileged EXEC mode command displays the SNMP status.
Syntax
show snmp
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
console(config)# snmp-server set sysName sysname ati