Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 78)

Page 77
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables Simple Network Time Protocol
(SNTP) Broadcast clients. Use the no form of this command to disable SNTP Broadcast clients.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Parameters
This command has no arguments or keywords.
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp client enable (Interface) Interface Configuration mode command to enable the SNTP client on a
specific interface.
Example
The following example enables the SNTP Broadcast clients.
sntp anycast client enable
The sntp anycast client enable Global Configuration mode command enables SNTP Anycast client. Use the no
form of this command to disable the SNTP Anycast client.
Syntax
sntp anycast client enable
no sntp anycast client enable
Parameters
This command has no arguments or keywords.
Default Configuration
The SNTP Anycast client is disabled.
Command Mode
Global Configuration mode
Console(config)# sntp broadcast client enable