Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 145)

IP Addressing Commands
Page 144
Parameters
•
name — Specifies the host entry to be removed. (Range: 1-158 characters )
• * — Removes all entries.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command deletes the host name-to-address mapping temporarily until the next renew of the IP address.
Example
The following example deletes all entries from the host name-to-address mapping.
show hosts
The show hosts Privileged EXEC mode command displays the default domain name, a list of name server hosts,
the static and the cached list of host names and addresses.
Syntax
show hosts [name]
Parameters
•
name — Specifies the host name. (Range: 1-158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays host information.
console# clear host dhcp *
console# show hosts
System name: Device
Default domain is gm.com, sales.gm.com, usa.sales.gm.com(DHCP)