Chapter 15. ip dhcp relay, Ip dhcp relay enable (global), Ip dhcp relay enable (interface) – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 165: Chapter 15.ip dhcp relay, Chapter 15. "ip dhcp relay" — define

IP DHCP Relay
Page 164
Chapter 15.IP DHCP Relay
ip dhcp relay enable (global)
The ip dhcp relay enable Global Configuration command enables Dynamic Host Configuration Protocol (DHCP)
relay features on the router. Use the no form of this command to disable the relay agent features.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables Dynamic Host Configuration Protocol (DHCP) relay features on the router.
ip dhcp relay enable (interface)
The ip dhcp relay enable Interface Configuration command enables Dynamic Host Configuration Protocol
(DHCP) relay features for an interface. Use the no form of this command to disable the relay agent features.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Parameters
This command has no arguments or keywords.
Default Configuration
Dynamic Host Configuration Protocol (DHCP) relay is enabled.
console(config)# ip dhcp relay enable