Show snmp engineid, Show snmp views, Show snmp engineid show snmp views – Allied Telesis AT-S94 CLI (AT-8000S Series) User Manual
Page 258

Page 257
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
show snmp engineid
The show snmp engineID Privileged EXEC mode command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
show snmp views
The show snmp views Privileged EXEC mode command displays the configuration of views.
Syntax
show snmp views [viewname]
Parameters
•
viewname — Specifies the name of the view. (Range: 1-30)
Default Configuration
This command has no default configuration.
IP Address
Management station IP Address.
Trap-Rec-Address
Targeted Recipient
Trap-Rec-Community
Statistics sent with the notification operation.
Version
SNMP version for the sent trap 1 or 2.
console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878