Allied Telesis AT-FS970M Series - Manual (Page 97)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
97
Modifying Port Spanning Tree Protocol Settings
To modify port settings for Spanning Tree Protocol, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab, hover over Port.
3. Move the cursor to the right and select Spanning Tree.
The Port Spanning Tree page is displayed. See Figure 36 on page 95.
4. Click Edit on the port that you want to change.
The Modify Port Spanning Tree Settings page is displayed. See
Figure 37.
Figure 37. Modify Port Spanning Tree Settings Page
5. Change the following settings as needed:
 Interface— Indicates the port ID.