Allied Telesis AT-FS970M Series - Manual (Page 82)

Chapter 5: Setting Port Statistics
82
Clearing Port Statistics
To clear the statistics for a port, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab, hover over Port.
3. Move the cursor to the right and select Statistics.
The Port Statistics Page with Tx + Rx tab selected is displayed. See
Figure 29 on page 76.
4. Select the desired Port Statistics tab. Choose from the following:
 Tx+Rx— Transmit and receive statistics.
 Receive— Receive statistics.
 Transmit— Transmit statistics.
 Interface— Interface statistics.
5. Click Clear on the port that you want to clear.