Allied Telesis AT-FS970M Series - Manual (Page 111)

111
Chapter 9
Link Aggregation Control Protocol
(LACP)
LACP is used to increase the bandwidth between the switch and other
LACP compatible devices by grouping ports together to form single virtual
links.
This chapter provides a brief description of LACP and explains how to
display and set LACP. See the following sections:
 “Overview” on page 112
 “Displaying LACP Trunks” on page 113
 “Adding an LACP Trunk” on page 115
 “Modifying an LACP Trunk” on page 117
 “Deleting an LACP Trunk” on page 119
For more information about LACP trunks, see the following chapters in the
AT-FS970M Series Version 2.3.1.0 Management Software Command Line
Interface User’s Guide:
 Link Aggregation Control Protocol (LACP)
 LACP Commands