Allied Telesis AT-FS970M Series - Manual (Page 280)

Chapter 24: Managing the ARP Table
280
Deleting ARP Entries
To delete a static ARP entry, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 119 on page 277.
2. From the Layer 3 tab drop-down menu, select ARP Table.
The ARP table is displayed. See Figure 120 on page 277.
3. Do one of the following:
 To clear all of the dynamic ARP entries in the ARP address table,
click Clear Dynamic.
 To delete a specific ARP entry, click Delete next to the IP address
that you want to delete.