Allied Telesis AT-FS970M Series - Manual (Page 61)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
61
Displaying System Information
To view basic information about the switch, select the System Tab.
The Dashboard Page is displayed as shown in Figure 3 on page 28.
The following fields are displayed:
 Up Time— Length of time since the switch was last reset or power-
cycled in days, hours, minutes and seconds.
The System section displays the following information:
 MAC Address— MAC address of the switch.
 Contact— Contact person for the switch. To specify this field, see
“Setting the Switch Information” on page 48.
 Serial No.— Unique serial number of the switch.
 Location— Location of the switch. To specify this field, see
“Setting the Switch Information” on page 48.
 System Name— Name of the switch. To specify this field, see
“Setting the Switch Information” on page 48.
 Version— Version number of the AT-FS970M software.
The Services section displays the following information:
 IPv6 Management— Indicates if IPv6 Management is enabled or
disabled on the switch.
 Spanning Tree— Indicates if STP, RSTP, or MSTP is enabled on
the switch. The default setting is “RSTP.”
 802.1x Port Authentication— Indicates if 802.1x Port
Authentication is enabled or disabled on the switch.
 SNMP— SNMP setting of the switch.
 QoS— Indicates if QoS is enabled or disabled on the switch.
 RIP— RIP setting of the switch
 HTTP— HTTP setting of the switch
 LLDP— Indicates if LLDP is enabled or disabled on the switch.
 Telnet— Indicates if Telnet is enabled or disabled on the switch.
 SFLOW— Indicates if sFlow is enabled or disabled on the switch.
 SSH— Indicates if SSH is enabled or disabled on the switch.
 IGMP Snooping— Indicates if IGMP Snooping is enabled or
disabled on the switch.
 Remote Logging— Indicates if the remote log is enabled or
disabled on the switch.