Allied Telesis AT-FS970M Series - Manual (Page 167)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
167
Modifying IGMP Snooping Query Interval
To modify the value of Query interval, do the following:
1. Hover the cursor over the Switching tab.
The Switching Tab is displayed. See Figure 62 on page 165.
2. Hover over IGMP and then move the cursor to the right to select IGMP
Querier.
The IGMP Snooping Querier page is displayed. See Figure 63 on page
165.
3. From the IGMP Snooping Querier page, click Add or Edit.
The Edit IGMP Snooping Querier page is displayed. See Figure 64.
Figure 64. Edit IGMP Snooping Querier Page
4. Enter the following settings as needed:
 VLAN— Select the VLAN ID from the pull-down menu.
 Query Interval— Enter a query interval in seconds. The range is 2
to 18,000. The default is 125 seconds.
5. Click Apply.
6. Click SAVE to save your changes to the startup configuration file.